FOLDABLE PRO SIXcopter frame with 25mm tubes

  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
  • FOLDABLE PRO SIXcopter frame with 25mm tubes
Summer holidays! We are closed until 8.July.
You can place a order, but we will send it after this date!

Comparing to previous version:
- foldable design, strong like standard version (or even stronger?),
- you can place ESCs near motors, or close to the center plates on arms,

We offer this frame in a few versions:
1. all parts w/o arms - if you have your own arms,
2. with 325mm long arms - for propellers up to 13"
3. with 370mm long arms - for propellers up to 14"
4. with 400mm long arms - for propellers up to 15"
5. with 495mm long arms - for propellers up to ..."

Materials:
Fiberglass G10/G11 2.5mm thick center boards, carbon tubes 25mm/23mm

Size / weight:
   <> 705mm motor to motor distance (diagonal) with 325mm arms,
        weight 880g (with 325mm arms, including motor mounts),
   <> 795mm diameter with 370mm long arms,
        weight 910g (with 370mm arms, including motor mounts),
   <> 855mm diameter with 400mm long arms,
        weight 930g (with 400mm arms, including motor mounts),
   <> 1045mm diameter with 495mm long arms,
        weight 990g (with 495mm arms, including motor mounts),

Basic set contain center boards, motor mounts, all screws, spacers,
power distribution tower, etc arms, (you can buy this frame w/o arms too - your choice),
two arms standard, four with extra mounting holes (see photo),

Optional (you can buy this parts separetely):
- controller mount plate: http://quadframe.com/products/dji-and-similar-controllers-support-plate
- protective cage: http://quadframe.com/products/protective-cage-for-six-frames
- clear dome: http://quadframe.com/products/175mm-clear-dome
- top LiPo plate: http://quadframe.com/products/top-lipo-battery-tray
- GPS suport: http://quadframe.com/products/dji-gps-25mm

Remember that any motors and propellers should be ballanced before using it!

Included parts: 

    - two black 2.5mm fiberglass main plates,
    - six motor mounts with boom block,
    - Power Distribution Tower: http://quadframe.com/products/power-distribution-tower
    - zipties,
    - screws, nuts, washers, spacers etc
    - arms carbon 3K twill, arms lenght your choice (or no arms),

Assembly manual - it's easy just follow photos:

 

 

 

The specifications and designs are subject to be changed without prior notice for futher improvement. 

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies.

‹ See more sixcopter frame.

adasdasdasdasdasdasds