FOLDABLE Heavy SIXcopter frame with 21.5mm tubes

  • FOLDABLE Heavy SIXcopter frame with 21.5mm tubes
  • FOLDABLE Heavy SIXcopter frame with 21.5mm tubes
  • FOLDABLE Heavy SIXcopter frame with 21.5mm tubes
  • FOLDABLE Heavy SIXcopter frame with 21.5mm tubes
  • FOLDABLE Heavy SIXcopter frame with 21.5mm tubes
  • FOLDABLE Heavy SIXcopter frame with 21.5mm tubes
  • FOLDABLE Heavy SIXcopter frame with 21.5mm tubes

Comparing to previous version:
- foldable design, strong like standard version (or even stronger?),
- you can place ESCs near motors, or close to the center plates on arms,

We offer this frame in a few versions:
1. all parts w/o no arms - if you have your own arms,
2. with 325mm long arms - for propellers up to 13"
3. with 370mm long arms - for propellers up to 14"

Materials:
Fiberglass G10/G11 2.0mm thick center boards, carbon tubes 21.5mm/19.50mm

Size / weight:
   <> 680mm motor to motor distance (diagonal) with 325mm arms,
         weight <> 790g (with 325mm arms, including motor mounts),
   <> 770mm diameter with 370mm long arms,
         weight <> 820g (with 370mm arms, including motor mounts),

Basic set contain center boards, motor mounts, all screws, spacers,
power distribution tower, etc arms 325mm or 370mm lenght
you can buy this frame w/o arms too - your choice),
two arms standard, four with extra mounting holes (see photo),

Optional (you can buy this parts separetely):
- controller mount plate: http://quadframe.com/products/dji-and-similar-controllers-support-plate
- protective cage: http://quadframe.com/products/protective-cage-for-six-frames
- clear dome: http://quadframe.com/products/175mm-clear-dome
- top LiPo plate: http://quadframe.com/products/top-lipo-battery-tray
- GPS suport: http://quadframe.com/products/dji-gps-support-plate

Remember that any motors and propellers should be ballanced before using it!

Included parts: 

    - two black 2.0mm fiberglass main plates,
    - six motor mounts with boom block,
    - Power Distribution Tower: http://quadframe.com/products/power-distribution-tower
    - zipties,
    - screws, nuts, washers, spacers etc
    - arms carbon 3K twill, 21.5x325mm or 21,5x370mm - your choice (or no arms),

Assembly manual - it's easy just follow photos:

 

 

The specifications and designs are subject to be changed without prior notice for futher improvement. 

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies.

        

‹ See more sixcopter frame.

adasdasdasdasdasdasds